
Remote control for scooptram / LHD
ZEGMEL scooptram remote control
Operate your scooptram from a safe distance with a remote control compatible with all scooptrams: only the interface changes. Compact, ergonomic design, assembled in Peru, with a 1-year warranty and 3-day delivery.
How it works
A portable transmitter and an on-board receiver
The system has two units: a portable transmitter carried by the operator and a receiver installed on the scooptram, connected to its hydraulic and electrical system. They communicate by radio frequency at 433 MHz.
The ZEGMEL remote control is designed to operate in any mining region. It is compatible with all scooptrams, regardless of the equipment brand or age: only the interface changes. Its compact, ergonomic design reduces operator fatigue on long shifts.
It is assembled in Peru with components certified by their manufacturers.

Benefits
Benefits of remote control in the underground mine
Higher productivity
Continuous operation and faster loading cycles.
Safe distance
The operator works away from the equipment and avoids unexpected accidents.
85 m range
In the underground mine, with line of sight between the transmitter and the receiver.
IP66 sealed
Housing protected against dust, water and impacts.
10-hour battery
Lithium-ion battery for a full shift of continuous operation.
Low maintenance
Practical, straightforward operation, with repair kits available.
Precision
Hall-effect joysticks
The Hall-effect joysticks have contactless sensing and spring-return to center. This provides precise, smooth and proportional control, greater durability and virtually no maintenance over their service life of 10 million cycles per axis.
Safety
Safety system on the transmitter
Safety is activated directly from the transmitter with three mechanisms:
- Emergency stop push button.
- Transmitter tilt of ±45°.
- Engine shutdown switch.
In addition, LED lights show the status of the connection and communication between the transmitter and the receiver.
Technical data sheet
Technical data sheet for the ZMT-RC-T45 transmitter and the ZMT-RC-R45 receiver
ZMT-RC-T45 transmitter
| Specification | Value |
|---|---|
| Dimensions | L260 × W158 × H150 mm |
| Power supply | 5 – 13 VDC |
| PCB | 2 mm, Hard Gold, 2 oz Cu, ATmega technology |
| Analog / digital inputs | 7 / 23 |
| Switches | 20 Ω resistance and 15 H inductance |
| Joysticks | Contactless Hall-effect sensor, service life of 10 million cycles per axis |
| Weight | 3.7 kg |
| Ingress protection | IP66 |
| Battery | Lithium-ion, 11.7 VDC @ 4800 mAh |
| Antenna | Internal, 2 dBi |
| Operating temperature | −10 °C to 70 °C |
| Frequency | 433 MHz |
ZMT-RC-R45 receiver

| Specification | Value |
|---|---|
| Dimensions | L220 × W120 × H100 mm |
| Power supply | 10 – 34 VDC |
| PCB | 2 mm, Hard Gold, 2 oz Cu, ATmega technology |
| Outputs | 24 PWM / On-Off |
| Analog / digital inputs | 7 / 16 |
| Weight | 2.1 kg |
| Ingress protection | IP66 |
| Antenna | External magnetic, 3 dBi |
| Operating temperature | −10 °C to 70 °C |
| Response time | 40 ms |
| Frequency | 433 MHz |
Service
Warranty, delivery and support
1-year warranty
The ZEGMEL remote control has a 1-year warranty.
3-day delivery
3-day delivery time for the remote-control system.
Training and support
Free training for operators and personalized on-site technical support.
Frequently asked questions
Frequently asked questions about the scoop remote control
Does it work with any scooptram brand?
Yes. The ZEGMEL remote control is compatible with all scooptrams; only the connection interface to the machine changes. Send us the model and we will prepare it.
What is the range?
In the underground mine, 85 m with line of sight.
What happens if the transmitter is dropped?
The system stops if the transmitter tilts ±45°. It also has an emergency stop push button and an engine shutdown switch.
How long does the battery last?
Up to 10 hours of continuous operation, with a 11.7 VDC, 4800 mAh lithium-ion battery.
What warranty does it have and how long is delivery?
It has a 1-year warranty and a 3-day delivery time.
What components is it assembled with?
It is assembled in Peru with components certified by their manufacturers.
Can I see the equipment surroundings during operation?
Yes, by complementing it with our wireless video system: a 7-inch monitor and IP69K cameras with night vision.
Contact
Do you have a scooptram you want to operate remotely?
Tell us the equipment model and the operation. We will send you a technical and commercial proposal.
- Email: ventas@zegmel.com
- Phone: +51 956357015
- Address: Av. Trapiche Chillon Km. 4 Mza. Ms Lote. L20, Lima
